Datasheet

 2003 Microchip Technology Inc. DS30235J-page 97
PIC16C62X
12.4 DC Characteristics: PIC16C62X/C62XA/CR62XA (Commercial, Industrial, Extended)
PIC16LC62X/LC62XA/LCR62XA (Commercial, Industrial, Extended) (CONT.)
PIC16C62X/C62XA/CR62XA
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial and
0°C ≤ T
A ≤ +70°C for commercial and
-40°C ≤ T
A ≤ +125°C for extended
PIC16LC62X/LC62XA/LCR62XA
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial and
0°C ≤ T
A ≤ +70°C for commercial and
-40°C ≤ T
A ≤ +125°C for extended
Param.
No.
Sym Characteristic Min Typ† Max Units Conditions
VIH Input High Voltage
I/O ports
D040 with TTL buffer 2.0V
0.25 V
DD
+ 0.8V
—
VDD
VDD
V VDD = 4.5V to 5.5V
otherwise
D041 with Schmitt Trigger input 0.8 VDD —
VDD
D042 MCLR RA4/T0CKI 0.8 VDD —
VDD
V
D043
D043A
OSC1 (XT, HS and LP)
OSC1 (in RC mode)
0.7 VDD
0.9 VDD
—
VDD
V
(Note 1)
D070 I
PURB PORTB weak pull-up current
50 200 400 µA
VDD = 5.0V, VPIN = VSS
D070 IPURB PORTB weak pull-up current
50 200 400 µA
VDD = 5.0V, VPIN = VSS
IIL Input Leakage Current
(2, 3)
I/O ports (Except PORTA)
±1.0
µAV
SS ≤ VPIN ≤ VDD, pin at hi-impedance
D060 PORTA — —
±0.5
µAVss ≤ V
PIN ≤ VDD, pin at hi-impedance
D061 RA4/T0CKI — —
±1.0
µAVss ≤ V
PIN ≤ VDD
D063 OSC1, MCLR ——
±5.0
µAVss ≤ VPIN ≤ VDD, XT, HS and LP osc
configuration
IIL Input Leakage Current
(2, 3)
I/O ports (Except PORTA)
±1.0
µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance
D060 PORTA — —
±0.5
µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance
D061 RA4/T0CKI — —
±1.0
µA Vss ≤ VPIN ≤ VDD
D063 OSC1, MCLR — —
±5.0
µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc
configuration
VOL Output Low Voltage
D080 I/O ports — —
0.6
VI
OL = 8.5 mA, VDD = 4.5V, -40° to +85°C
——
0.6
VI
OL = 7.0 mA, VDD = 4.5V, +125°C
D083 OSC2/CLKOUT (RC only) — —
0.6
VI
OL = 1.6 mA, VDD = 4.5V, -40° to +85°C
——
0.6
VI
OL = 1.2 mA, VDD = 4.5V, +125°C
* These parameters are characterized but not tested.
† Data in "Typ" column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1:
In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the PIC16C62X(A) be driven with
external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on applied voltage level. The specified levels represent normal
operating conditions. Higher leakage current may be measured at different input voltages
.
3:
Negative current is defined as coming out of the pin.