Datasheet

PIC16C62X
DS30235J-page 98  2003 Microchip Technology Inc.
12.4 DC Characteristics: PIC16C62X/C62XA/CR62XA (Commercial, Industrial, Extended)
PIC16LC62X/LC62XA/LCR62XA (Commercial, Industrial, Extended) (CONT.)
PIC16C62X/C62XA/CR62XA
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial and
0°C ≤ T
A ≤ +70°C for commercial and
-40°C ≤ T
A ≤ +125°C for extended
PIC16LC62X/LC62XA/LCR62XA
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial and
0°C ≤ T
A ≤ +70°C for commercial and
-40°C ≤ T
A ≤ +125°C for extended
Param.
No.
Sym Characteristic Min Typ† Max Units Conditions
VOL Output Low Voltage
D080 I/O ports — —
0.6
V IOL = 8.5 mA, VDD = 4.5V, -40° to +85°C
— —
0.6
V IOL = 7.0 mA, VDD = 4.5V, +125°C
D083 OSC2/CLKOUT (RC only) — —
0.6
V IOL = 1.6 mA, VDD = 4.5V, -40° to +85°C
— —
0.6
V IOL = 1.2 mA, VDD = 4.5V, +125°C
V
OH Output High Voltage
(3)
D090 I/O ports (Except RA4) VDD-0.7 — — V IOH = -3.0 mA, VDD = 4.5V, -40° to +85°C
V
DD-0.7 — — V IOH = -2.5 mA, VDD = 4.5V, +125°C
D092 OSC2/CLKOUT (RC only) V
DD-0.7 — — V IOH = -1.3 mA, VDD = 4.5V, -40° to +85°C
V
DD-0.7 — — V IOH = -1.0 mA, VDD = 4.5V, +125°C
VOH Output High Voltage
(3)
D090 I/O ports (Except RA4) VDD-0.7 — — V IOH = -3.0 mA, VDD = 4.5V, -40° to +85°C
VDD-0.7 — — V IOH = -2.5 mA, VDD = 4.5V, +125°C
D092 OSC2/CLKOUT (RC only) VDD-0.7 — — V IOH = -1.3 mA, VDD = 4.5V, -40° to +85°C
VDD-0.7 — — V IOH = -1.0 mA, VDD = 4.5V, +125°C
*D150 V
OD Open-Drain High Voltage
10*
8.5*
V RA4 pin PIC16C62X, PIC16LC62X
RA4 pin PIC16C62XA, PIC16LC62XA,
PIC16CR62XA, PIC16LCR62XA
*D150 VOD Open-Drain High Voltage
10*
8.5*
V RA4 pin PIC16C62X, PIC16LC62X
RA4 pin PIC16C62XA, PIC16LC62XA,
PIC16CR62XA, PIC16LCR62XA
Capacitive Loading Specs on
Output Pins
D100 COSC
2
OSC2 pin
15
pF In XT, HS and LP modes when external
clock used to drive OSC1.
D101 C
IO All I/O pins/OSC2 (in RC mode)
50
pF
Capacitive Loading Specs on
Output Pins
D100 COSC
2
OSC2 pin
15
pF In XT, HS and LP modes when external
clock used to drive OSC1.
D101 CIO All I/O pins/OSC2 (in RC mode)
50
pF
* These parameters are characterized but not tested.
† Data in "Typ" column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1:
In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the PIC16C62X(A) be driven
with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on applied voltage level. The specified levels represent normal
operating conditions. Higher leakage current may be measured at different input voltages
.
3:
Negative current is defined as coming out of the pin.