Information

 2004 Microchip Technology Inc. DS80101D-page 15
PIC16C62X
Capacitive Loading Specs on
Output Pins
D100 C
OSC2 OSC2 pin 15 pF In XT, HS and LP modes when external
clock used to drive OSC1.
D101 C
IO All I/O pins/OSC2 (in RC mode) 50 pF
TABLE 2: DC CHARACTERISTICS: PIC16C620A/C621A/C622A-40
(4)
(Commercial)
PIC16CR620A-40
(4)
(Commercial)
PIC16CE62X-30
(5)
(Commercial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature –40°C ≤ T
A ≤ +85°C for industrial and
0°C ≤ T
A ≤ +70°C for commercial and
–40°C ≤ T
A ≤ +125°C for extended
Parm
No.
Sym Characteristic Min Typ† Max Unit Conditions
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested.
Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the PIC16CE62X be driven
with external clock in RC mode.
2: The leakage current on the MCLR
pin is strongly dependent on applied voltage level. The specified levels represent normal
operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as coming out of the pin.
4: See Table 3 and Table 4 for 16C62X and 16CR62X devices for operation between 20 MHz and 40 MHz for valid
modified characteristics.
5: See Table 5 and Table 6 for 16CE62X devices for operation between 20 MHz and 30 MHz for valid modified characteristics.