PIC16C62X PIC16C62XA/CR62XA/CE62XA Rev. A Silicon/Data Sheet Errata The PIC16C62X (Rev. A) parts you have received conform functionally to the Device Data Sheet (DS30235J for PIC16C62XA and PIC16CR62XA, or DS40182C for PIC16CE62X), except for the anomalies described below. All the problems listed here will be addressed in future revisions of the PIC16C62X silicon. FIGURE 1: PIC16LC62XA VOLTAGE-FREQUENCY GRAPH, -40°C ≤ TA ≤ 0°C 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.7 2.5 2.
PIC16C62X PIC16LC62XA VOLTAGE-FREQUENCY GRAPH, 0°C ≤ TA ≤ +70°C FIGURE 2: 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 20 25 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts. DS80101D-page 2 2004 Microchip Technology Inc.
PIC16C62X FIGURE 3: PIC16LC62XA VOLTAGE-FREQUENCY GRAPH, +70°C ≤ TA ≤ +125°C 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 20 25 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts. 2004 Microchip Technology Inc.
PIC16C62X PIC16LCR62XA VOLTAGE-FREQUENCY GRAPH, -40°C ≤ TA ≤ +125°C FIGURE 4: 6.0 5.5 5.0 VDD (VOLTS) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 20 25 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts. DS80101D-page 4 2004 Microchip Technology Inc.
PIC16C62X 1. Module: RESET Work around The minimum specification for the MCLR must be met in order to reset the PIC16CXXX. If a MCLR pulse occurs that is less than the minimum specification (parameter #30), improper device operation can occur. A possible circuit is shown in Figure 1. Proper design validation needs to be done to ensure desired operation over the applications operating conditions.
PIC16C62X 2. Module: Oscillator The events that wake-up the device from SLEEP are: The Oscillator Start-up Timer (TOST) delay may not occur when the device wakes up from SLEEP. • • • • Figure 2 shows the start-up of the crystal after the event that causes the device to wake-up from SLEEP mode (as specified in the Device Data Sheet). The start-up time (TOST) may not occur.
PIC16C62X Clarifications/Corrections to the Data Sheets: In the Device Data Sheets (DS30235J for 16C62XA and 16CR62XA, or DS40182C for 16CE62X), the following clarifications and corrections should be noted. 1. Module: Electrical Specifications Figures 1 through 5 have been added. FIGURE 1: PIC16LC620A/LC621A/LC622A/LCE623/LCE624/LCE625-04 VOLTAGE-FREQUENCY GRAPH, -40°C ≤ TA ≤ 0°C 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.7 2.5 2.
PIC16C62X FIGURE 2: PIC16LC620A/LC621A/LC622A/LCE623/LCE624/LCE625-04 VOLTAGE-FREQUENCY GRAPH, 0°C ≤ TA ≤ +125°C 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 20 25 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts.
PIC16C62X FIGURE 3: PIC16LCR620A-04 VOLTAGE-FREQUENCY GRAPH, -40°C ≤ TA ≤ +125°C 6.0 5.5 5.0 VDD (VOLTS) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 20 25 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts. 2004 Microchip Technology Inc.
PIC16C62X FIGURE 4: PIC16C620A/C621A/C622A/CR620A - 40 VOLTAGE-FREQUENCY GRAPH, 0°C ≤ TA ≤ +70°C 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 0 4 10 20 25 40 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts.
PIC16C62X FIGURE 5: PIC16CE623/CE624/CE625-30 VOLTAGE-FREQUENCY GRAPH, 0°C ≤ TA ≤ +70°C 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 0 4 10 20 25 30 Frequency (MHz) Note 1: The shaded region indicates the permissible combinations of voltage and frequency. 2: The maximum rated speed of the part limits the permissible combinations of voltage and frequency. Please reference the Product Identification System section for the maximum rated speed of the parts.
PIC16C62X 2. Module: Electrical Specifications Tables 1, 2, and 3 have been changed. DC CHARACTERISTICS: PIC16C620A/C621A/C622A-40(7) (Commercial) PIC16CR620A-40(7) (Commercial) PIC16CE62X-30(8) (Commercial) TABLE 1: Standard Operating Conditions (unless otherwise stated) Operating temperature –40°C ≤ TA ≤ +85°C for industrial and 0°C ≤ TA ≤ +70°C for commercial and –40°C ≤ TA ≤ +125°C for extended DC CHARACTERISTICS Param No.
PIC16C62X DC CHARACTERISTICS: PIC16C620A/C621A/C622A-40(7) (Commercial) PIC16CR620A-40(7) (Commercial) PIC16CE62X-30(8) (Commercial) (CONTINUED) TABLE 1: Standard Operating Conditions (unless otherwise stated) Operating temperature –40°C ≤ TA ≤ +85°C for industrial and 0°C ≤ TA ≤ +70°C for commercial and –40°C ≤ TA ≤ +125°C for extended DC CHARACTERISTICS Param No. D022 Sym Min Typ† WDT Current (Note 5) – 6.
PIC16C62X TABLE 2: DC CHARACTERISTICS: PIC16C620A/C621A/C622A-40(4) (Commercial) PIC16CR620A-40(4) (Commercial) PIC16CE62X-30(5) (Commercial) Standard Operating Conditions (unless otherwise stated) Operating temperature –40°C ≤ TA ≤ +85°C for industrial and 0°C ≤ TA ≤ +70°C for commercial and –40°C ≤ TA ≤ +125°C for extended DC CHARACTERISTICS Parm No.
PIC16C62X TABLE 2: DC CHARACTERISTICS: PIC16C620A/C621A/C622A-40(4) (Commercial) PIC16CR620A-40(4) (Commercial) PIC16CE62X-30(5) (Commercial) Standard Operating Conditions (unless otherwise stated) Operating temperature –40°C ≤ TA ≤ +85°C for industrial and 0°C ≤ TA ≤ +70°C for commercial and –40°C ≤ TA ≤ +125°C for extended DC CHARACTERISTICS Parm No.
PIC16C62X TABLE 3: DC CHARACTERISTICS: DC Characteristics Power Supply Pins PIC16C620A/C621A/C622A-40(3) (Commercial) PIC16CR620A-40(3) (Commercial) Standard Operating Conditions (unless otherwise specified) Operating Temperature 0°C ≤ TA ≤ +70°C (commercial) Sym Min Typ(1) Max Units VDD 4.5 — 5.5 V IDD — — 5.5 7.7 11.5 16 mA mA HS Oscillator Operating Frequency FOSC 20 — 40 Input Low Voltage OSC1 VIL VSS — 0.
PIC16C62X TABLE 5: DC CHARACTERISTICS: PIC16CE623A/CE624/CE625-30(3) (Commercial) DC Characteristics Power Supply Pins Standard Operating Conditions (unless otherwise specified) Operating Temperature 0°C ≤ TA ≤ +70°C (commercial) Sym Min Typ(1) Max Units VDD 4.5 — 5.5 V IDD — — 4.4 5.8 9.1 12.0 mA mA HS Oscillator Operating Frequency FOSC 20 — 30 Input Low Voltage OSC1 VIL VSS — 0.2VDD V HS mode, OSC1 externally driven Input High Voltage OSC1 VIH 0.
PIC16C62X 4. RC Oscillator In the RC Oscillator, Section 9.2.4., page 48, the text and figure should be as follows: For applications where precise timing is not a requirement, the RC oscillator option is available. The operation and functionality of the RC oscillator is dependent upon a number of variables. The RC oscillator frequency is a function of: • Supply voltage • Resistor (REXT) and capacitor (CEXT) values • Operating temperature.
PIC16C62X APPENDIX A: REVISION HISTORY Rev A Document (3/2001) First revision of this document. Rev B Document (5/2001) Under Clarifications/Corrections to the Data Sheets, Figures 1 through 5 were added (pages 3 through 7). Changes were made to Tables 1, 2, and 3 (pages 8 through 11). Table 4, 5 and 6 were added (pages 11 and 12). Rev C Document (10/2001) Under Clarifications/Corrections to the Data Sheets, Item 2, Table 1, Parameter number D005, under the “Min” column, “3.7” was changed to “3.
PIC16C62X NOTES: DS80101D-page 20 2004 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature.
WORLDWIDE SALES AND SERVICE AMERICAS China - Beijing Korea Corporate Office Unit 706B Wan Tai Bei Hai Bldg. No. 6 Chaoyangmen Bei Str. Beijing, 100027, China Tel: 86-10-85282100 Fax: 86-10-85282104 168-1, Youngbo Bldg. 3 Floor Samsung-Dong, Kangnam-Ku Seoul, Korea 135-882 Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Chengdu 200 Middle Road #07-02 Prime Centre Singapore, 188980 Tel: 65-6334-8870 Fax: 65-6334-8850 2355 West Chandler Blvd.
