Datasheet

PIC16C5X
DS30453E-page 138 Preliminary  1997-2013 Microchip Technology Inc.
17.3 DC Characteristics: PIC16C54C/C55A/C56A/C57C/C58B-04, 20 (Commercial, Industrial, Extended)
PIC16LC54C/LC55A/LC56A/LC57C/LC58B-04 (Commercial, Industrial)
PIC16CR54C/CR56A/CR57C/CR58B-04, 20 (Commercial, Industrial, Extended)
PIC16LCR54C/LCR56A/LCR57C/LCR58B-04 (Commercial, Industrial
)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0°C  TA  +70C for commercial
–40C  T
A  +85C for industrial
–40C  T
A  +125C for extended
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
D030 VIL Input Low Voltage
I/O Ports
I/O Ports
MCLR
(Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
VSS
VSS
VSS
VSS
VSS
VSS
—
—
—
—
—
—
0.8 V
0.15 V
DD
0.15 VDD
0.15 VDD
0.15 VDD
0.3 VDD
V
V
V
V
V
V
4.5V <VDD  5.5V
Otherwise
RC mode only
(3)
XT, HS and LP modes
D040 V
IH Input High Voltage
I/O ports
I/O ports
MCLR
(Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
2.0
0.25 V
DD+0.8
0.85 V
DD
0.85 VDD
0.85 VDD
0.7 VDD
—
—
—
—
—
—
VDD
VDD
VDD
VDD
VDD
VDD
V
V
V
V
V
V
4.5V < VDD 5.5V
Otherwise
RC mode only
(3)
XT, HS and LP modes
D050 V
HYS Hysteresis of Schmitt
Trigger inputs
0.15 VDD*—— V
D060 I
IL Input Leakage Current
(1,2)
I/O ports
MCLR
MCLR
T0CKI
OSC1
-1.0
-5.0
-3.0
-3.0
0.5
—
0.5
0.5
0.5
+1.0
+5.0
+3.0
+3.0
—
A
A
A
A
A
For V
DD 5.5V:
V
SS  VPIN  VDD,
pin at hi-impedance
V
PIN = VSS +0.25V
V
PIN = VDD
VSS  VPIN VDD
VSS  VPIN  VDD,
XT, HS and LP modes
D080 V
OL Output Low Voltage
I/O ports
OSC2/CLKOUT
—
—
—
—
0.6
0.6
V
V
I
OL = 8.7 mA, VDD = 4.5V
I
OL = 1.6 mA, VDD = 4.5V,
RC mode only
D090 V
OH Output High Voltage
(2)
I/O ports
OSC2/CLKOUT
VDD - 0.7
V
DD - 0.7
—
—
—
—
V
V
I
OH = -5.4 mA, VDD = 4.5V
I
OH = -1.0 mA, VDD = 4.5V,
RC mode only
* These parameters are characterized but not tested.
† Data in the Typical (“Typ”) column is based on characterization results at 25C. This data is for design guid-
ance only and is not tested.
Note 1: The leakage current on the MCLR
/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltage.
2: Negative current is defined as coming out of the pin.
3: For the RC mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC16C5X
be driven with external clock in RC mode.