Datasheet

PIC16C5X
DS30453E-page 158 Preliminary  1997-2013 Microchip Technology Inc.
19.2 DC Characteristics: PIC16C54C/C55A/C56A/C57C/C58B-40 (Commercial)
(1)
DC CHARACTERISTICS Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0°C  T
A  +70C for commercial
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
D030 V
IL Input Low Voltage
I/O Ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1
V
SS
VSS
VSS
VSS
—
—
—
—
0.8
0.15 V
DD
0.15 VDD
0.2 VDD
V
V
V
V
4.5V <VDD  5.5V
HS, 20 MHz  F
OSC 40 MHz
D040 V
IH Input High Voltage
I/O ports
MCLR
(Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1
2.0
0.85 VDD
0.85 VDD
0.8 VDD
—
—
—
—
VDD
VDD
VDD
VDD
V
V
V
V
4.5V < VDD 5.5V
HS, 20 MHz F
OSC 40 MHz
D050 V
HYS Hysteresis of Schmitt
Trigger inputs
0.15 VDD*— — V
D060 I
IL Input Leakage Current
(2,3)
I/O ports
MCLR
MCLR
T0CKI
OSC1
-1.0
-5.0
—
-3.0
-3.0
0.5
—
0.5
0.5
0.5
+1.0
+5.0
+3.0
+3.0
—
A
A
A
A
A
For V
DD 5.5V:
V
SS  VPIN  VDD,
pin at hi-impedance
V
PIN = VSS +0.25V
V
PIN = VDD
VSS  VPIN VDD
VSS  VPIN  VDD, HS
D080 V
OL Output Low Voltage
I/O ports — — 0.6 V I
OL = 8.7 mA, VDD = 4.5V
D090 V
OH Output High Voltage
(3)
I/O ports VDD - 0.7 — — V IOH = -5.4 mA, VDD = 4.5V
* These parameters are characterized but not tested.
† Data in the Typical (“Typ”) column is based on characterization results at 25C. This data is for design guidance
only and is not tested.
Note 1: Device operation between 20 MHz to 40 MHz requires the following: V
DD between 4.5V to 5.5V, OSC1 pin
externally driven, OSC2 pin not connected and HS oscillator mode and commercial temperatures. For opera-
tion between DC and 20 MHz, See Section 17.3.
2: The leakage current on the MCLR
/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input volt-
age.
3: Negative current is defined as coming out of the pin.