Datasheet

 1997-2013 Microchip Technology Inc. Preliminary DS30453E-page 109
PIC16C5X
15.4 DC Characteristics: PIC16C54A-04, 10, 20, PIC16LC54A-04, PIC16LV54A-02 (Commercial)
PIC16C54A-04I, 10I, 20I, PIC16LC54A-04I, PIC16LV54A-02I (Industrial)
PIC16C54A-04E, 10E, 20E, PIC16LC54A-04E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0C  T
A  +70C for commercial
–40C  T
A  +85C for industrial
–20C  T
A  +85C for industrial-PIC16LV54A-02I
–40°C  T
A  +125C for extended
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
D030 VIL Input Low Voltage
I/O ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
V
SS
VSS
VSS
VSS
VSS
—
—
—
—
—
0.2 VDD
0.15 VDD
0.15 VDD
0.15 VDD
0.3 VDD
V
V
V
V
Pin at hi-impedance
RC mode only
(3)
XT, HS and LP modes
D040 VIH Input High Voltage
I/O ports
I/O ports
MCLR
(Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
0.2 VDD + 1
2.0
0.85 VDD
0.85 VDD
0.85 VDD
0.7 VDD
—
—
—
—
—
—
VDD
VDD
VDD
VDD
VDD
VDD
V
V
V
V
V
V
For all VDD
(4)
4.0V < VDD 5.5V
(4)
RC mode only
(3)
XT, HS and LP modes
D050 V
HYS Hysteresis of Schmitt
Trigger inputs
0.15 VDD*— — V
D060 IIL Input Leakage Current
(1,2)
I/O ports
MCLR
MCLR
T0CKI
OSC1
-1.0
-5.0
—
-3.0
-3.0
0.5
—
0.5
0.5
0.5
+1.0
+5.0
+3.0
+3.0
—
A
A
A
A
A
For VDD  5.5V:
V
SS  VPIN  VDD,
pin at hi-impedance
VPIN = VSS +0.25V
V
PIN = VDD
VSS  VPIN VDD
VSS  VPIN  VDD,
XT, HS and LP modes
D080 VOL Output Low Voltage
I/O ports
OSC2/CLKOUT
—
—
—
—
0.6
0.6
V
V
I
OL = 8.7 mA, VDD = 4.5V
I
OL = 1.6 mA, VDD = 4.5V,
RC mode only
VOH Output High Voltage
(2)
I/O ports
OSC2/CLKOUT
VDD - 0.7
V
DD - 0.7
—
—
—
—
V
V
I
OH = -5.4 mA, VDD = 4.5V
I
OH = -1.0 mA, VDD = 4.5V,
RC mode only
* These parameters are characterized but not tested.
† Data in the Typical (“Typ”) column is based on characterization results at 25C. This data is for design guidance only
and is not tested.
Note 1: The leakage current on the MCLR
/VPP pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltage.
2: Negative current is defined as coming out of the pin.
3: For the RC mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC16C5X be
driven with external clock in RC mode.