Datasheet
1997-2013 Microchip Technology Inc. Preliminary DS30453E-page 83
PIC16C5X
13.3 DC Characteristics:PIC16CR54A-04, 10, 20, PIC16LCR54A-04 (Commercial)
PIC16CR54A-04I, 10I, 20I, PIC16LCR54A-04I (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0°C TA +70°C for commercial
–40°C T
A +85°C for industrial
Param
No.
Symbol Characteristic Min Typ† Max Units Conditions
D030 V
IL Input Low Voltage
I/O ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
V
SS
VSS
VSS
VSS
VSS
—
—
—
—
—
0.2 V
DD
0.15 VDD
0.15 VDD
0.15 VDD
0.15 VDD
V
V
V
V
V
Pin at hi-impedance
RC mode only
(3)
XT, HS and LP modes
D040 V
IH Input High Voltage
I/O ports
I/O ports
MCLR
(Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
2.0
0.6 V
DD
0.85 VDD
0.85 VDD
0.85 VDD
0.85 VDD
—
—
—
—
—
—
VDD
VDD
VDD
VDD
VDD
VDD
V
V
V
V
V
V
VDD = 3.0V to 5.5V
(4)
Full VDD range
(4)
RC mode only
(3)
XT, HS and LP modes
D050 V
HYS Hysteresis of Schmitt
Trigger inputs
0.15 VDD*— — V
D060 I
IL Input Leakage Current
(1,2)
I/O ports
MCLR
MCLR
T0CKI
OSC1
–1.0
–5.0
—
–3.0
–3.0
—
—
0.5
0.5
0.5
+1.0
—
+5.0
+3.0
+3.0
A
A
A
A
A
For V
DD 5.5V:
V
SS VPIN VDD,
pin at hi-impedance
V
PIN = VSS + 0.25V
V
PIN = VDD
VSS VPIN VDD
VSS VPIN VDD,
XT, HS and LP modes
D080 VOL Output Low Voltage
I/O ports
OSC2/CLKOUT
—
—
—
—
0.5
0.5
V
V
I
OL = 10 mA, VDD = 6.0V
I
OL = 1.9 mA, VDD = 6.0V,
RC mode only
D090 VOH Output High Voltage
(2)
I/O ports
OSC2/CLKOUT
V
DD – 0.5
V
DD – 0.5
—
—
—
—
V
V
I
OH = –4.0 mA, VDD = 6.0V
I
OH = –0.8 mA, VDD = 6.0V,
RC mode only
* These parameters are characterized but not tested.
† Data in the Typical (“Typ”) column is based on characterization results at 25C. This data is for design guid-
ance only and is not tested.
Note 1: The leakage current on the MCLR
/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltage.
2: Negative current is defined as coming out of the pin.
3: For the RC mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC16C5X
be driven with external clock in RC mode.
4: The user may use the better of the two specifications.