Datasheet
1996-2013 Microchip Technology Inc. Preliminary DS40143E-page 79
PIC16C55X
VDD-0.7 — — V IOH=-2.5 mA,
V
DD=4.5V, +125C
D092 OSC2/CLKOUT V
DD-0.7 — — V IOH=-1.3 mA, VDD=4.5V, -40 to
+85C
(RC only) V
DD-0.7 — — V IOH=-1.0 mA,
V
DD=4.5V, +125C
* V
OD Open-Drain High Voltage 10* V RA4 pin
Capacitive Loading Specs on Output Pins
D100 COSC
2
OSC2 pin 15 pF In XT, HS and LP modes when
external clock used to drive
OSC1.
D101 C
IO All I/O pins/OSC2 (in RC
mode)
50 pF
10.2 DC Characteristics: PIC16C55X (Commercial, Industrial, Extended)
PIC16LC55X(Commercial, Industrial, Extended) (Continued)
DC Characteristics
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial and
0°C TA +70°C for commercial and
-40°C TA +125°C for automotive
Operating voltage V
DD range as described in DC spec Table 10-1
Param.
No.
Sym Characteristic Min Typ† Max Unit Conditions
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the PIC16C55X be
driven with external clock in RC mode.
2: The leakage current on the MCLR
pin is strongly dependent on applied voltage level. The specified levels represent nor-
mal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as coming out of the pin.