Datasheet

 1999-2012 Microchip Technology Inc. DS40192D-page 55
PIC16C505
10.0 ELECTRICAL CHARACTERISTICS - PIC16C505
Absolute Maximum Ratings†
Ambient Temperature under bias........................................................................................................... –40°C to +125°C
Storage Temperature ............................................................................................................................. –65°C to +150°C
Voltage on V
DD with respect to VSS ....................................................................................................................0 to +7 V
Voltage on MCLR
with respect to VSS...............................................................................................................0 to +14 V
Voltage on all other pins with respect to V
SS ............................................................................... –0.6 V to (VDD + 0.6 V)
Total Power Dissipation
(1)
....................................................................................................................................700 mW
Max. Current out of V
SS pin ..................................................................................................................................150 mA
Max. Current into V
DD pin .....................................................................................................................................125 mA
Input Clamp Current, I
IK (VI < 0 or VI > VDD) 20 mA
Output Clamp Current, I
OK (VO < 0 or VO > VDD)20 mA
Max. Output Current sunk by any I/O pin................................................................................................................25 mA
Max. Output Current sourced by any I/O pin...........................................................................................................25 mA
Max. Output Current sourced by I/O port .............................................................................................................100 mA
Max. Output Current sunk by I/O port ..................................................................................................................100 mA
Note 1: Power Dissipation is calculated as follows: P
DIS = VDD x {IDD -  IOH} +  {(VDD-VOH) x IOH} + (VOL x IOL)
†
NOTICE: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.