Datasheet

PIC12F752/HV752
DS41576B-page 172 Preliminary  2011 Microchip Technology Inc.
20.4 DC Characteristics: PIC12F752 - I (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
Param
No.
Device Characteristics Min Typ† Max Units
Conditions
V
DD Note
D020 Power-down Base
Current (IPD)
(2)
—0.01TBDA 2.0 WDT, BOR, Comparator, V
REF and
T1OSC disabled
—0.3TBDA3.0
PIC12F752 — 0.5 TBD A5.0
150 TBD nA 3.0
-40°C  TA  +25°C for industrial
D021 — 3.0 TBD A 2.0 WDT Current
(1)
—4.0TBDA3.0
—7.0TBDA5.0
D022 — 5.0 TBD A 3.0 BOR Current
(1)
—6.0TBDA5.0
D023 — 362 TBD A 2.0 CxSP = 1, Comparator Current
(1)
,
single comparator enabled
— 418 TBD A3.0
— 500 TBD A5.0
D024 — 96 TBD A 2.0 CxSP = 0, Comparator Current
(1)
,
single comparator enabled
—112TBDA3.0
— 132 TBD A5.0
D025 — 0.3 TBD A 3.0 A/D Current
(1)
, no conversion in
progress
—0.36TBDA5.0
D026 — 0.2 TBD A 3.0 DAC Current
(1)
—0.4TBDA5.0
D027 — 59 TBD A 3.0 FVR Current
(1)
, FVRBUFEN = 1,
REFOUT buffer enabled
—98TBDA5.0
Legend: TBD = To Be Determined
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this
peripheral is enabled. The peripheral  current can be determined by subtracting the base I
DD or IPD
current from this limit. Max values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is
measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.