Datasheet

PIC12F629/675
DS41190C-page 90  2003 Microchip Technology Inc.
12.5 DC Characteristics: PIC12F629/675-E (Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +125°C for extended
Param
No.
Device Characteristics Min Typ† Max Units
Conditions
VDD Note
D020E Power-down Base Current
(I
PD)
— 0.00099 3.5 µA 2.0 WDT, BOD, Comparators, VREF,
and T1OSC disabled
— 0.0012 4.0 µA 3.0
— 0.0029 8.0 µA 5.0
D021E — 0.3 6.0 µA 2.0 WDT Current
(1)
— 1.8 9.0 µA 3.0
— 8.4 20 µA 5.0
D022E — 58 70 µA 3.0 BOD Current
(1)
— 109 130 µA 5.0
D023E — 3.3 10 µA 2.0 Comparator Current
(1)
— 6.1 13 µA 3.0
— 11.5 24 µA 5.0
D024E — 58 70 µA 2.0 CVREF Current
(1)
— 85 100 µA 3.0
— 138 165 µA 5.0
D025E — 4.0 10 µA 2.0 T1 OSC Current
(1)
— 4.6 12 µA 3.0
— 6.0 20 µA 5.0
D026E — 0.0012 6.0 µA 3.0 A/D Current
(1)
— 0.0022 8.5 µA 5.0
† Data in ‘Typ’ column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this
peripheral is enabled. The peripheral ∆ current can be determined by subtracting the base I
DD or IPD
current from this limit. Max values should be used when calculating total current consumption.
2: The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to V
DD.