Datasheet

 2003 Microchip Technology Inc. DS41190C-page 89
PIC12F629/675
12.4 DC Characteristics: PIC12F629/675-E (Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +125°C for extended
Param
No.
Device Characteristics Min Typ† Max Units
Conditions
VDD Note
D010E Supply Current (IDD) — 9 16 µA 2.0 FOSC = 32 kHz
LP Oscillator Mode
— 18 28 µA 3.0
— 35 54 µA 5.0
D011E — 110 150 µA 2.0 FOSC = 1 MHz
XT Oscillator Mode
— 190 280 µA 3.0
— 330 450 µA 5.0
D012E — 220 280 µA 2.0 FOSC = 4 MHz
XT Oscillator Mode
— 370 650 µA 3.0
— 0.6 1.4 mA 5.0
D013E — 70 110 µA 2.0 FOSC = 1 MHz
EC Oscillator Mode
— 140 250 µA 3.0
— 260 390 µA 5.0
D014E — 180 250 µA 2.0 FOSC = 4 MHz
EC Oscillator Mode
— 320 470 µA 3.0
— 580 850 µA 5.0
D015E — 340 450 µA 2.0 FOSC = 4 MHz
INTOSC Mode
— 500 780 µA 3.0
— 0.8 1.1 mA 5.0
D016E — 180 250 µA 2.0 FOSC = 4 MHz
EXTRC Mode
— 320 450 µA 3.0
— 580 800 µA 5.0
D017E — 2.1 2.95 mA 4.5 FOSC = 20 MHz
HS Oscillator Mode
— 2.4 3.0 mA 5.0
† Data in ‘Typ’ column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The test conditions for all IDD measurements in Active Operation mode are: OSC1 = external square wave,
from rail to rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern, and temperature also have
an impact on the current consumption.