Datasheet

 2003 Microchip Technology Inc. DS41190C-page 129
PIC12F629/675
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type.
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: [phone]
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
PART NO. X /XX XXX
PatternPackageTemperature
Range
Device
Device PIC12F6XX: Standard VDD range
PIC12F6XXT: (Tape and Reel)
Temperature Range I = -40°C to +85°C
E = -40°C to +125°C
Package P = PDIP
SN = SOIC (Gull wing, 150 mil body)
MF = MLF-S
Pattern 3-Digit Pattern Code for QTP (blank otherwise)
Examples:
a) PIC12F629 – E/P 301 = Extended Temp.,
PDIP package, 20 MHz, QTP pattern #301
b) PIC12F675 – I/SO = Industrial Temp., SOIC
package, 20 MHz