Datasheet

PIC12F609/615/617/12HV609/615
DS41302D-page 146  2010 Microchip Technology Inc.
16.2 DC Characteristics: PIC12F609/615/617-I (Industrial)
PIC12F609/615/617-E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device Characteristics Min Typ† Max Units
Conditions
V
DD Note
D010 Supply Current (I
DD)
(1, 2)
—
13 25
A2.0FOSC = 32 kHz
LP Oscillator mode
PIC12F609/615/617 — 19 29 A3.0
—3251A5.0
D011* — 135 225 A2.0F
OSC = 1 MHz
XT Oscillator mode
—185285A3.0
—300405A5.0
D012 — 240 360 A2.0F
OSC = 4 MHz
XT Oscillator mode
—360505A3.0
— 0.66 1.0 mA 5.0
D013* — 75 110 A2.0F
OSC = 1 MHz
EC Oscillator mode
—155255A3.0
—345530A5.0
D014 — 185 255 A2.0F
OSC = 4 MHz
EC Oscillator mode
—325475A3.0
— 0.665 1.0 mA 5.0
D016* — 245 340 A2.0F
OSC = 4 MHz
INTOSC mode
—360485A3.0
— 0.620 0.845 mA 5.0
D017 — 395 550 A2.0F
OSC = 8 MHz
INTOSC mode
— 0.620 0.850 mA 3.0
— 1.2 1.6 mA 5.0
D018 — 175 235 A2.0F
OSC = 4 MHz
EXTRC mode
(3)
—285390A3.0
—530750A5.0
D019 — 2.2 3.1 mA 4.5 F
OSC = 20 MHz
HS Oscillator mode
— 2.8 3.35 mA 5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from rail-to-
rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading and
switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current con-
sumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula IR = V
DD/2REXT (mA) with REXT in KOhms (K