Datasheet

 2010 Microchip Technology Inc. DS41302D-page 169
PIC12F609/615/617/12HV609/615
TABLE 16-15: DC CHARACTERISTICS FOR IPD SPECIFICATIONS FOR PIC12F615-H (High Temp.)
TABLE 16-16: WATCHDOG TIMER SPECIFICATIONS FOR PIC12F615-H (High Temp.)
TABLE 16-17: LEAKAGE CURRENT SPECIFICATIONS FOR PIC12F615-H
(High Temp.)
Param
No.
Device
Characteristics
Units Min Typ Max
Condition
V
DD Note
D020E
Power Down Base
Current
A
— 0.05 12 2.0
I
PD Base
— 0.15 13 3.0
— 0.35 14 5.0
D021E
A
—0.520 2.0
WDT Current
—2.525 3.0
—9.536 5.0
D022E
A
—5.028 3.0
BOR Current
—6.036 5.0
D023E
A
—105195 2.0
I
PD Current (Both
Comparators Enabled)
— 110 210 3.0
— 116 220 5.0
A
— 50 105 2.0
I
PD Current (One Comparator
Enabled)
—55110 3.0
— 60 125 5.0
D024E
A
—3058 2.0
I
PD (CVREF, High Range)
—4585 3.0
— 75 142 5.0
D025E
A
—3976 2.0
I
PD (CVREF, Low Range)
—59114 3.0
— 98 190 5.0
D026E
A
—5.530 2.0
I
PD (T1 OSC, 32 kHz)
—7.035 3.0
—8.545 5.0
D027E
A
—0.212 3.0
IPD (A2D on, not converting)
—0.315 5.0
Param
No.
Sym Characteristic Units Min Typ Max Conditions
31 T
WDT Watchdog Timer Time-out Period
(No Prescaler)
ms 6 20 70 150°C Temperature
Param
No.
Sym Characteristic Units Min Typ Max Conditions
D061 I
IL Input Leakage Current
(1)
(GP3/RA3/MCLR)
µA — ±0.5 ±5.0 V
SS VPIN VDD
D062 IIL Input Leakage Current
(2)
(GP3/RA3/MCLR)
µA 50 250 400 V
DD = 5.0V
Note 1: This specification applies when GP3/RA3/MCLR
is configured as an input with the pull-up disabled. The
leakage current for the GP3/RA3/MCLR
pin is higher than for the standard I/O port pins.
2: This specification applies when GP3/RA3/MCLR
is configured as the MCLR reset pin function with the
weak pull-up enabled.