Datasheet

 2010 Microchip Technology Inc. DS41302D-page 167
PIC12F609/615/617/12HV609/615
16.12 High Temperature Operation
This section outlines the specifications for the
PIC12F615 device operating in a temperature range
between -40°C and 150°C.
(4)
The specifications
between -40°C and 150°C
(4)
are identical to those
shown in DS41288 and DS80329.
TABLE 16-13: ABSOLUTE MAXIMUM RATINGS
Note 1: Writes are not allowed for Flash
Program Memory above 125°C.
2: All AC timing specifications are increased
by 30%. This derating factor will include
parameters such as T
PWRT.
3: The temperature range indicator in the
part number is “H” for -40°C to 150°C.
(4)
Example: PIC12F615T-H/ST indicates the
device is shipped in a T
APE and reel
configuration, in the MSOP package, and
is rated for operation from -40°C to
150°C.
(4)
4: AEC-Q100 reliability testing for devices
intended to operate at 150°C is 1,000
hours. Any design in which the total oper-
ating time from 125°C to 150°C will be
greater than 1,000 hours is not warranted
without prior written approval from
Microchip Technology Inc.
Parameter Source/Sink Value Units
Max. Current: V
DD Source 20 mA
Max. Current: VSS Sink 50 mA
Max. Current: P
IN Source 5 mA
Max. Current: PIN Sink 10 mA
Pin Current: at VOH Source 3 mA
Pin Current: at V
OL Sink 8.5 mA
Port Current: GPIO Source 20 mA
Port Current: GPIO Sink 50 mA
Maximum Junction Temperature 155 °C
Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure above
maximum rating conditions for extended periods may affect device reliability.