Datasheet

PIC12(L)F1840
DS40001441D-page 332  2011-2013 Microchip Technology Inc.
TABLE 30-5: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER
AND BROWN-OUT RESET PARAMETERS
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
30 TMCLMCLR Pulse Width (low) 2 — — s
31 T
WDTLP Low-Power Watchdog Timer
Time-out Period
10 16 27 ms VDD = 3.3V-5V,
1:16 Prescaler used
32 TOST Oscillator Start-up Timer Period
(Note 1)
— 1024 — Tosc
33* T
PWRT Power-up Timer Period, PWRTE = 0 40 65 140 ms
34* T
IOZ I/O high-impedance from MCLR Low
or Watchdog Timer Reset
——2.0s
35 V
BOR Brown-out Reset Voltage (Note 2) 2.55
2.35
1.80
2.70
2.45
1.90
2.85
2.58
2.00
V
V
V
BORV = 0, PIC12(L)F1840
BORV = 1, PIC12F1840
PIC12LF1840
37* V
HYST Brown-out Reset Hysteresis 0 25 60 mV -40°C to +85°C
38* T
BORDC Brown-out Reset DC Response
Time
1335sVDD  VBOR
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: By design, the Oscillator Start-up Timer (OST) counts the first 1024 cycles, independent of frequency.
2: To ensure these voltage tolerances, VDD and VSS must be capacitively decoupled as close to the device
as possible. 0.1
F and 0.01 F values in parallel are recommended.