Datasheet

 2011-2013 Microchip Technology Inc. DS40001441D-page 125
PIC12(L)F1840
16.3 Register Definitions: ADC Control
REGISTER 16-1: ADCON0: ADC CONTROL REGISTER 0
U-0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0
— CHS<4:0> GO/DONE ADON
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7 Unimplemented: Read as ‘0’
bit 6-2
CHS<4:0>: Analog Channel Select bits
11111 = FVR (Fixed Voltage Reference) Buffer 1 Output
(2)
11110 = DAC_output
(1)
11101 = Temperature Indicator
(3)
.
11100 = Reserved. No channel connected.
•
•
•
00100 = Reserved. No channel connected.
00011 =AN3
00010 =AN2
00001 =AN1
00000 =AN0
bit 1
GO/DONE: ADC Conversion Status bit
1 = ADC conversion cycle in progress. Setting this bit starts an ADC conversion cycle.
This bit is automatically cleared by hardware when the ADC conversion has completed.
0 = ADC conversion completed/not in progress
bit 0
ADON: ADC Enable bit
1 = ADC is enabled
0 = ADC is disabled and consumes no operating current
Note 1: See Section 17.0 “Digital-to-Analog Converter (DAC) Module” for more information.
2: See Section 14.0 “Fixed Voltage Reference (FVR)” for more information.
3: See Section 15.0 “Temperature Indicator Module” for more information.