Datasheet

 2013-2015 Microchip Technology Inc. DS40001723D-page 281
PIC12(L)F1571/2
TABLE 26-15: COMPARATOR SPECIFICATIONS
(1)
TABLE 26-16: DIGITAL-TO-ANALOG CONVERTER (DAC) SPECIFICATIONS
(1)
Operating Conditions (unless otherwise stated)
V
DD = 3.0V, TA = +25°C
Param.
No.
Sym. Characteristics Min. Typ. Max. Units Comments
CM01 V
IOFF Input Offset Voltage — ±7.5 ±60 mV CxSP = 1,
V
ICM = VDD/2
CM02 V
ICM Input Common-Mode Voltage 0 — VDD V
CM03 CMRR Common-Mode Rejection Ration — 50 — dB
CM04A TRESP
(2)
Response Time Rising Edge — 400 800 ns CxSP = 1
CM04B Response Time Falling Edge — 200 400 ns CxSP = 1
CM04C Response Time Rising Edge — 1200 — ns CxSP = 0
CM04D Response Time Falling Edge — 550 — ns CxSP = 0
CM05* T
MC2OV Comparator Mode Change to
Output Valid
——10s
CM06 C
HYSTER Comparator Hysteresis — 25 — mV CxHYS = 1,
CxSP = 1
* These parameters are characterized but not tested.
Note 1: See Section 27.0 “DC and AC Characteristics Graphs and Charts” for operating characterization.
2: Response time measured with one comparator input at V
DD/2, while the other input transitions from
V
SS to VDD.
Operating Conditions (unless otherwise stated)
VDD = 3.0V, TA = +25°C
Param.
No.
Sym. Characteristics Min. Typ. Max. Units Comments
DAC01* C
LSB Step Size — VDD/32 — V
DAC02* CACC Absolute Accuracy — —  1/2 LSb
DAC03* CR Unit Resistor Value (R) — 5K — 
DAC04* C
ST Settling Time
(2)
——10s
* These parameters are characterized but not tested.
Note 1: See Section 27.0 “DC and AC Characteristics Graphs and Charts” for operating characterization.
2: Settling time measured while DACR<4:0> transitions from ‘0000’ to ‘1111’.