Datasheet

PIC12(L)F1501
DS41615A-page 232 Preliminary  2011 Microchip Technology Inc.
Power-down Base Current (IPD)
(2)
D027* — 20 43 55 A 1.8 1 Comparator Enabled
(HP Mode)
—21 45 60
A3.0
D027* — 30 53 65 A 2.3 1 Comparator Enabled
(HP Mode)
— 31 57 70 A 3.0
— 32 61 75 A 5.0
D027A* — 7 20 35
A 1.8 1 Comparator Enabled
(LP Mode)
—80 25 40
A3.0
D027A* — 17 30 45 A 2.3 1 Comparator Enabled
(LP Mode)
— 18 37 55 A 3.0
— 19 40 60 A 5.0
D028* — 21 44 56
A 1.8 2 Comparators Enabled
(HP Mode)
—22 46 61
A3.0
D028* — 31 54 66 A 2.3 2 Comparators Enabled
(HP Mode)
— 32 58 71 A 3.0
— 33 62 76 A 5.0
D028A* — 8 21 36
A 1.8 2 Comparators Enabled
(LP Mode)
—81 26 41
A3.0
D028A* — 18 31 46 A 2.3 2 Comparators Enabled
(LP Mode)
— 19 38 56 A 3.0
— 20 41 61 A 5.0
27.3 DC Characteristics: PIC12(L)F1501-I/E (Power-Down) (Continued)
PIC12LF1501
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC12F1501
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Legend: TBD = To Be Determined
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral
 current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: A/D oscillator source is FRC.