Datasheet

 2011 Microchip Technology Inc. Preliminary DS41585A-page 25

PIC10(L)F320/322

3.5 Device ID and Revision ID

The memory location 2006h is where the Device ID and

Revision ID are stored. The upper nine bits hold the

Device ID. The lower five bits hold the Revision ID. See

Section 9.4 “User ID, Device ID and Configuration

Word Access” for more information on accessing

these memory locations.

Development tools, such as device programmers and

debuggers, may be used to read the Device ID and

Revision ID.

(1)

RRRRRR

DEV8 DEV7 DEV6 DEV5 DEV4 DEV3

bit 13 bit 8

RRRRRRRR

DEV2 DEV1 DEV0 REV4 REV3 REV2 REV1 REV0

bit 7 bit 0

Legend: U = Unimplemented bit, read as ‘0’

R = Readable bit W = Writable bit ‘0’ = Bit is cleared

-n = Value at POR ‘1’ = Bit is set x = Bit is unknown

bit 13-5 DEV<8:0>: Device ID bits

bit 4-0 REV<4:0>: Revision ID bits

These bits are used to identify the revision.

Note 1: This location cannot be written.

Device

DEVICEID<13:0> Values

DEV<8:0> REV<4:0>

PIC10F320 10 1001 101 x xxxx

PIC10LF320 10 1001 111 x xxxx

PIC10F322 10 1001 100 x xxxx

PIC10LF322 10 1001 110 x xxxx