Datasheet

PIC10(L)F320/322
DS41585A-page 176 Preliminary  2011 Microchip Technology Inc.
24.4 DC Characteristics: PIC10(L)F320/322-I/E
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
VIL Input Low Voltage
I/O PORT:
D032 with TTL buffer — — 0.8 V 4.5V
 VDD  5.5V
D032A — — 0.15 V
DD V1.8V  VDD  4.5V
D033 with Schmitt Trigger buffer — — 0.2 V
DD V2.0V  VDD  5.5V
D034 MCLR
——0.2VDD V
V
IH Input High Voltage
I/O ports:
D040 with TTL buffer 2.0 — — V 4.5V
 VDD 5.5V
D040A 0.25 V
DD +
0.8
——V1.8V  VDD  4.5V
D041 with Schmitt Trigger buffer 0.8 V
DD ——V2.0V  VDD  5.5V
D042 MCLR
0.8 VDD ——V
I
IL Input Leakage Current
(2)
D060 I/O ports — ± 5
± 5
± 125
± 1000
nA
nA
VSS  VPIN  VDD, Pin at
high-impedance @ 85°C
125°C
D061 MCLR
—± 50± 200nAVSS  VPIN  VDD @ 85°C
I
PUR Weak Pull-up Current
D070* 25
25
100
140
200
300
A
V
DD = 3.3V, VPIN = VSS
VDD = 5.0V, VPIN = VSS
VOL Output Low Voltage
D080 I/O ports
——0.6V
IOL = 8mA, VDD = 5V
I
OL = 6mA, VDD = 3.3V
I
OL = 1.8mA, VDD = 1.8V
V
OH Output High Voltage
D090 I/O ports
V
DD - 0.7 — — V
I
OH = 3.5mA, VDD = 5V
I
OH = 3mA, VDD = 3.3V
I
OH = 1mA, VDD = 1.8V
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: Negative current is defined as current sourced by the pin.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.