Datasheet

PIC10(L)F320/322
DS41585A-page 174 Preliminary  2011 Microchip Technology Inc.
D017
Supply Current (IDD)
(1, 2)
— 130 — A1.8FOSC = 500 kHz
HFINTOSC mode
— 190 —
A3.0
D017 — 150 — A 2.3 FOSC = 500 kHz
HFINTOSC mode
— 210 — A 3.0
— 270 — A 5.0
D018 — 800 —
A1.8FOSC = 8 MHz
HFINTOSC mode
— 1300 —
A3.0
D018 — 0.85 — mA 2.3 FOSC = 8 MHz
HFINTOSC mode
— 1.4 — mA 3.0
— 1.6 — mA 5.0
D019 — 1.25 — mA 1.8 F
OSC = 16 MHz
HFINTOSC mode
—2.0 — mA 3.0
D019 — 1.4 — mA 2.3 FOSC = 16 MHz
HFINTOSC mode
— 2.2 — mA 3.0
— 2.4 — mA 5.0
24.2 DC Characteristics: PIC10(L)F320/322-I/E (Industrial, Extended) (Continued)
PIC10LF320/322
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC10F320/322
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
Note 1:
The test conditions for all IDD measurements in active operation mode are: CLKIN = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.