Information

 2011-2013 Microchip Technology Inc. DS80000529E-page 5
PIC10(L)F320/322
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS41585A):
1. Module: Flash Program Memory Control
A note box should be inserted directly under the
title of section 9.2.2 Flash Memory Unlock
Sequence. The note should read:
2. Module: Timer2 Module
In Register 17-1, T2CON, T2CKPS bits (bits 1:0)
should read:
REGISTER 17-1: T2CON: TIMER2 CONTROL REGISTER
3. Module: Numerically Controlled
Oscillator (NCO) Module
Figure 20-1, Numerically Controlled Oscillator
(NCOx) Module Simplified Block Diagram, and
Figure 20-2, FDC Output Mode Operation
Diagram, should be:
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
Note: A delay of at least 100 µs is required
after Power-on Reset (POR), before
executing a Flash Memory unlock
sequence.
U-0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0
— TOUTPS<3:0> TMR2ON T2CKPS<1:0>
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 1-0 T2CKPS<1:0>: Timer2 Clock Prescale Select bits
11 = Prescaler is 64
10 = Prescaler is 16
01 = Prescaler is 4
00 = Prescaler is 1