Datasheet

© 2007 Microchip Technology Inc. DS41270E-page 55
PIC10F220/222
10.3 DC Characteristics: PIC10F220/222 (Industrial, Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating temperature -40°C ≤ T
A ≤ +85°C (industrial)
-40°C ≤ T
A ≤ +125°C (extended)
Operating voltage V
DD range as described in DC specification
Param
No.
Sym Characteristic Min Typ† Max Units Conditions
V
IL Input Low Voltage
I/O ports:
D030 with TTL buffer Vss — 0.8 V For all 4.5 ≤ V
DD ≤ 5.5V
D030A Vss — 0.15 V
DD V Otherwise
D031 with Schmitt Trigger
buffer
Vss — 0.2 V
DD V
D032 MCLR
, T0CKI Vss — 0.2 VDD V
V
IH Input High Voltage
I/O ports: —
D040 with TTL buffer 2.0 — V
DD V4.5 ≤ VDD ≤ 5.5V
D040A 0.25 V
DD + 0.8 — VDD V Otherwise
D041 with Schmitt Trigger
buffer
0.8V
DD —VDD V For entire VDD range
D042 MCLR
, T0CKI 0.8VDD —VDD V
D070 I
PUR GPIO weak pull-up current 50 250 400 μAVDD = 5V, VPIN = VSS
IIL Input Leakage Current
(1)
D060 I/O ports — ±0.1 ± 1 μAVss ≤ VPIN ≤ VDD, Pin at high-imped-
ance
D061 GP3/MCLR
(2)
—±0.7± 5μAVss ≤ VPIN ≤ VDD
Output Low Voltage
D080 I/O ports — — 0.6 V I
OL = 8.5 mA, VDD = 4.5V, -40°C to
+85°C
D080A — — 0.6 V I
OL = 7.0 mA, VDD = 4.5V, -40°C to
+125°C
Output High Voltage
D090 I/O ports
(2)
VDD – 0.7 — — V IOH = -3.0 mA, VDD = 4.5V, -40°C to
+85°C
D090A V
DD – 0.7 — — V IOH = -2.5 mA, VDD = 4.5V, -40°C to
+125°C
Capacitive Loading Specs on Output Pins
D101 All I/O pins — — 50* pF
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
* These parameters are for design guidance only and are not tested.
Note 1: Negative current is defined as coming out of the pin.
2: This specification applies when GP3/MCLR
is configured as an input with pull-up disabled. The leakage current of the
MCLR
circuit is higher than the standard I/O logic.