Specifications

Development Systems Ordering Guide

MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Socket Modules, MPLAB® In-Circuit Debugger, Software Tools, Programmers

and Demonstration Boards - NOTES

NOTES 1: MPLAB® ICE 2000 pod available separately. (ICE2000)

2: MPLAB® ICE 4000 pod available separately. (ICE4000)

3: PRO MATE® II Programmer unit (no longer available). (DV007003)

4: Optional In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II available separately. (AC004004)

5: PICSTART® Plus (DV003001)

6: MPLAB® ICD 2 In-Circuit Debugger. Configurations are:

(DV164005) ICD 2 module, USB cable and ICD cable.

(DV164006) ICD 2 module, USB cable, ICD cable, serial cable, PICDEM™ 2 Plus and power supply.

(DV164007) ICD 2 module, USB cable, ICD cable, serial cable and power supply;

(DV164030) ICD 2 module, USB cable, ICD cable, serial cable and dsPICDEM™ Starter Demo Board;

(AC162049) ICD 2 Universal Programming Module;

(AC162051) ICD or ICD 2 28/40 PDIP Header Interface Board.

7: Custom adapter required; not available from Microchip. See “Readme” for PICSTART® Plus.

8: MPLAB® PM3 Programmer Unit available separately. (DV007004). ICSP™ function is built-in with MPLAB® PM3 Programmer.

(AC164350) MPLAB® PM3 Adapter for PRO MATE® II Socket modules.

* New product or future support. Contact Microchip web site at www.microchip.com for availability.

✓ Supported with basic configuration. If a part number is listed in the column, that part is required and available separately.