User manual

Hardware Specification

10.6.2.3 MODULAR CABLE SPECIFICATION

• Manufacturer, Part Number – Microchip Technology, 07-00024

10.7 TARGET BOARD CONSIDERATIONS

The target board should be powered according to the requirements of the selected

device (1.8V-5.0V) and the application.

Depending on the type of debugger-to-target communications used, there will be some

considerations for target board circuitry:

• Section 2.4.2 “Target Connection Circuitry”

• Section 2.4.5 “Circuits That Will Prevent the Debugger From Functioning”