Datasheet

 2012 Microchip Technology Inc. Preliminary DS41664A-page 11
MTCH101
Note: The tables provided following this note are
a statistical summary based on a limited
number of samples and are provided for
informational purposes only. The
performance characteristics listed herein
are not tested or guaranteed. In some
tables, the data presented may be outside
the specified operating range (e.g.,
outside specified power supply range)
and therefore, outside the warranted
range.
8.1 DC Characteristics: MTCH101 (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating Temperature -40C  TA  +85C (industrial)
Param
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
D001 VDD Supply Voltage 2.0 — 5.5 V
D002 VPOR VDD Start Voltage
to ensure Power-on-Reset
—Vss— V
D003 S
VDD VDD Rise Rate
to ensure Power-on Reset
0.05* — — V/ms
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
TABLE 8-1: RESPONSE TIME AND CURRENT CONSUMPTION
Power Mode
Typical
Current (µA)
Highest Sensitivity
Response Time (ms)
Lowest Sensitivity
Response Time (ms)
Conditions
Typical Max. Typical Max.
Normal mode 120 100 150 210 260 VDD = 2.0V
Low-Power mode 30 790 890 900 1000
Normal mode 200 80 130 190 240 V
DD = 3.3V
Low-Power mode 54 640 740 750 850
Normal mode 340 76 119 190 220 V
DD = 5.0V
Low-Power mode 97 530 620 640 730