Datasheet

MTCH101
DS41664A-page 10 Preliminary  2012 Microchip Technology Inc.
8.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias..........................................................................................................-40°C to +125°C
Storage temperature ............................................................................................................................-65°C to +150°C
Voltage on V
DD with respect to VSS ...............................................................................................................0 to +6.5V
Voltage on all other pins with respect to V
SS................................................................................ -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
..................................................................................................................................800 mW
Max. current out of V
SS pin ..................................................................................................................................80 mA
Max. current into V
DD pin .....................................................................................................................................80 mA
Input clamp current, I
IK (VI < 0 or VI > VDD)20 mA
Output clamp current, I
OK (VO < 0 or VO > VDD) 20 mA
Max. output current sunk by any I/O pin...............................................................................................................25 mA
Max. output current sourced by any I/O pin .........................................................................................................25 mA
Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOL x IOL)
†
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.