User manual

MRF89XAMxA PICtail™/PICtail Plus Daughter Board User’s Guide
DS70653A-page 12 © 2011 Microchip Technology Inc.
FIGURE 2-1: MRF89XAMxA PICtail™/PICtail PLUS DAUGHTER BOARD
PLUGGED INTO PIC18 EXPLORER BOARD
2.3 PLUGGING INTO THE EXPLORER 16 DEVELOPMENT BOARD
The MRF89XAMxA PICtail/PICtail Plus Daughter Board can be plugged into the
Explorer 16 Development Board as shown in
Figure 2-2.
The MRF89XAMxA PICtail/PICtail Plus Daughter Board’s 30-pin card edge connector
is plugged into the top section of the PICtail Plus connector. This will connect to the
SPI Port 1 on the PIC
®
microcontroller that is plugged into the Plug In Module (PIM)
socket.
The MRF89XAMxA PICtail/PICtail Plus Daughter Board’s 30-pin card edge connector
is plugged into the mid-section of the PICtail Plus connector. This will connect to the
SPI Port 2 on the PIC microcontroller that is plugged into the PIM socket.