Datasheet
MIC2026/2076
Dual-Channel Power Distribution Switch
UL Recognized Component
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
June 2010
M9999-060410-B
General Description
The MIC2026 and MIC2076 are high-side MOSFET
switches optimized for general-purpose power distribution
requiring circuit protection.
The MIC2026/76 are internally current limited and have
thermal shutdown that protects the device and load.
The MIC2076 offers “smart” thermal shutdown that
reduces current consumption in fault modes. When a
thermal shutdown fault occurs, the output is latched off
until the faulty load is removed. Removing the load or
toggling the enable input will reset the device output.
Both devices employ soft-start circuitry that minimizes
inrush current in applications where highly capacitive loads
are employed.
A fault status output flag is asserted during overcurrent
and thermal shutdown conditions. Transient faults are
internally filtered.
The MIC2026/76 are available in 8-pin DIP or 8-pin SOIC.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
Features
• 140m maximum on-resistance per channel
• 2.7V to 5.5V operating range
• 500mA minimum continuous current per channel
• Shortcircuit protection with thermal shutdown
• Thermally isolated channels
• Fault status flag with 3ms filter eliminates false
assertions
• Undervoltage lockout
• Reverse current flow blocking (no “body diode”)
• Circuit breaker mode (MIC2076)
• Logic-compatible inputs
• Soft-start circuit
• Low quiescent current
• Pin compatible with MIC2526
• UL File # E179633
Applications
• USB peripherals
• General purpose power switching
• ACPI power distribution
• Notebook PCs
• PDAs
• PC card hot swap
___________________________________________________________________________________________________________
Typical Application
ENA OUTA
FLGAI N
FLGB GND
ENB OUTB
ON/OFF
OVERCURRENT
OVERCURRENT
ON/OFF
MIC2026-2
Logic Controller
V
CC
2.7V to 5.5V
0.1µF
VIN
Load
Load
V
CONT.
10k
10k