Datasheet

MCP9700/9700A and MCP9701/9701A
DS21942E-page 4 © 2009 Microchip Technology Inc.
M
Typical Load Capacitance C
LOAD
— — 1000 pF The MCP9700/9700A and
MCP9701/9701A family is
characterized and produc-
tion tested with a capacitive
load of 1000 pF.
SC-70 Thermal Response to 63% t
RES
— 1.3 — s 30°C (Air) to +125°C
(Fluid Bath) (Note 3)
TO-92 Thermal Response to 63% t
RES
—1.65— s
DC ELECTRICAL CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise indicated:
MCP9700/9700A: V
DD
= 2.3V to 5.5V, GND = Ground, T
A
= -40°C to +125°C and No load.
MCP9701/9701A: V
DD
= 3.1V to 5.5V, GND = Ground, T
A
= -10°C to +125°C and No load.
Parameter Sym Min Typ Max Unit Conditions
Note 1: The MCP9700/9700A family accuracy is tested with V
DD
= 3.3V, while the MCP9701/9701A accuracy is
tested with V
DD
= 5.0V.
2: The MCP9700/9700A and MCP9701/9701A family is characterized using the first-order or linear equation,
as shown in Equation 4-2. Also refer to Figure 2-16.
3: SC70-5 package thermal response with 1x1 inch, dual-sided copper clad, TO-92-3 package thermal
response without PCB (leaded).
TEMPERATURE CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated:
MCP9700/9700A: V
DD
= 2.3V to 5.5V, GND = Ground, T
A
= -40°C to +125°C and No load.
MCP9701/9701A: V
DD
= 3.1V to 5.5V, GND = Ground, T
A
= -10°C to +125°C and No load.
Parameters Sym Min Typ Max Units Conditions
Temperature Ranges
Specified Temperature Range (Note 1) T
A
-40 — +125 °C MCP9700/9700A
T
A
-10 — +125 °C MCP9701/9701A
T
A
-40 — +150 °C High Temperature,
MCP9700 only
Operating Temperature Range T
A
-40 — +125 °C Extended Temperature
T
A
-40 — +150 °C High Temperature
Storage Temperature Range T
A
-65 — +150 °C
Thermal Package Resistances
Thermal Resistance, 5LD SC70 θ
JA
—331—°C/W
Thermal Resistance, 3LD SOT-23 θ
JA
—308—°C/W
Thermal Resistance, 3LD TO-92 θ
JA
—146—°C/W
Note 1: Operation in this range must not cause T
J
to exceed Maximum Junction Temperature (+150°C).