Information
PIC32MZ Embedded Connectivity (EC) Starter Kit
with Crypto Engine (DM320006-C)
This kit provides the easiest and lowest-cost
method to experience the high performance
and advanced peripherals integrated in the
PIC32MZ Embedded Connectivity MCUs. It
features a PIC32MZ2048ECM144 with on-board crypto
engine that reduces the software overhead of actions such
as encryption, decryption and authentication. This starter
kit features a socket that can accommodate various
10/100 Ethernet transceiver (RJ-45) plug-in connectors for
prototyping and development.
PIC32 Ethernet Starter Kit (DM320004)
This kit provides the easiest and lowest-cost
method to experience 10/100 Ethernet
development with PIC32 MCUs. when
combined with our free TCP/IP software,
this kit gets your project running quickly. The
PIC32 MCU has an available CAN2.0b peripheral and USB
host/device/OTG.
PIC32 Ethernet Starter Kit II (DM320004-2)
This kit provides the easiest and lowest-cost
method to experience 10/100 Ethernet
development with PIC32 microcontrollers.
When combined with our free TCP/IP
software, this kit gets your project running quickly. The
PIC32 microcontroller has an available CAN 2 .0b peripheral
and USB host/device/OTG . This starter kit features a
socket that can accommodate various 10/100 Ethernet
PHY Daughter Boards for prototyping and development.
PIC32 USB Starter Kit III (DM320003-3)
This kit provides you with an easy and
cost-effective option to experience the
USB and SPI/I
2
S™ functionality of the new
PIC32MX3/MX4 microcontrollers. The board
comes equipped with everything that is
needed including our free USB software to develop USB
embedded host/device/OTG applications.
PIC32 I/O Expansion Board (DM320002)
If you use a PIC32 starter board (DM320001,
DM320003), this I/O expansion board will
provide you with full access to MCU signals,
JTAG debugging and ICSP™ development and enables the
connection of PICtail Plus daughter cards.
MPLAB Starter Kit for Serial Memory Products
(DV243003)
This kit includes everything necessary
to quickly develop a robust and reliable
Serial EEPROM design, greatly reducing
the time required for system integration
and hardware/software fine-tuning.
Supports the Microchip UNI/O bus, I²C™, SPI and
Microwire Serial EEPROMs
.
Motor Control Starter Kit (DM330015)
This Motor Control Starter Kit includes
a BLDC motor, a three-phase inverter,
an on-board debugger/programmer, a
user-configurable switch, a two-channel
mTouch® sensing slider with LED indictors for motor speed
display and a 9V power supply. This compact starter kit is
an easy and inexpensive way to evaluate the capabilities of
the dsPIC33 family for motor control applications.
Microstick II (DM330013-2)
Microstick II delivers a complete development hardware
platform for Microchip's 16-bit and 32-bit microcontrollers
and digital signal controllers. It's the perfect solution if
you are looking for a low-cost, easy-to-use development
platform and supports all 3.3V PIC24FJ, PIC24H, dsPIC33,
and PIC32 SPDIP packaged devices.
PICDEM™ PIC18 Explorer Board (DM183032)
This low-cost demo board features a PIC18F8722 MCU which
is the superset of the traditional PIC18 general-purpose 5V
family. It also comes with the PIC18F87J11 processor PIM
which is the superset of the PIC18 J-series of 3V MCUs for
cost-sensitive applications. This single development board
supports dozens of general-purpose PIC18 families using
various processor PIMs.
MPLAB Starter Kit for dsPIC DSCs (DM330011)
This kit introduces you to the dsPIC
Digital Signal Controller device using its
speech and audio processing capabilities.
It is USB-powered, has on-board
debug circuitry and a 24-bit codec for high-quality audio
applications. The board also contains reconfigurable
switches, potentiometers, a temperature sensor and a
4 Mb serial EEPROM to store data such as audio samples.
PIC32 Starter Kit (DM320001)
With over 35 source code examples as
well as a "Getting Started" project, this
kit includes everything needed to write,
program, debug and execute code on a
high-performance PIC32 microcontroller.
PIC32MX1/MX2 Starter Kit (DM320013)
The PIC32MX1/MX2 Starter kit is a
complete solution for exploring the low-
cost, high-performance PIC32MX1/MX2
devices. This kit is perfect for providing
an introduction to basic user interfaces with mTouch
sensing solutions buttons and high-quality audio.
PIC32 Bluetooth® Starter Kit (DM320018)
This low-cost Bluetooth development
platform features the PIC32MX270F256D
MCU. This kit features a HCI-based
Bluetooth radio, push buttons, a CREE high-
output multi-color LED, standard single-color
LEDs, an accelerometer, a temperature sensor and GPIO
for rapid development of Bluetooth Serial Port Profile (SPP),
USB and general-purpose applications.
debug circuitry and a 24-bit codec for high-quality audio
Getting Started
Getting Started
9
Quick Guide to Microchip Development Tools