Information

Touch Sensing Technology
Enhanced mTouch Capacitive Touch Evaluation Kit
(DM183026-2)
The enhanced mTouch Capacitive
Touch Evaluation Kit provides a
simple platform for developing a
variety of capactive touch sense
applications using PIC16F, PIC24F
and PIC32 microcontrollers.
Metal Over Cap Accessory Kit (AC183026)
The Metal Over Cap Accessory
Kit contains two daughter boards
showcasing metal over cap
technology. One board has a
stainless steel cover and the other board has a plastic
cover. This kit provides an easy way to evaluate our unique
technology when used in conjunction with the mTouch
Capacitive Touch Evaluation Kit (DM183026-2).
mTouch AR1000 Development Kit (DV102011)
This kit provides everything you
need to get started using the
AR1000 resistive controller to
create a turnkey, cost-effective
solution. The kit includes the
AR1000 development board, a 7"
four-wire resistive touch screen, a PICkit Serial Analyzer and
all necessary interface cables, as well as a CD containing
technical documentation and all necessary software.
mTouch AR1100 Development Kit (DV102012)
The mTouch AR1100
Development Kit provides
everything you need to get started
using the AR1100 resistive
controller to create a turnkey,
cost-effective USB solution.
PIC32 GUI Development Board with Projected
Capacitive Touch (DM320015)
This board enables development of
cost-effective multi-touch graphical
user interfaces. It is based on
the PIC32MX795F512H and the
MTCH6301 projected capacitive
touch controller. The board provides USB host and device
connectivity and supports I/O connections via through-hole
pads for custom board attachment.
MGC3130 Single Zone "Hillstar" Evaluation Kit
(DM160218)
This kit builds a complete
MGC3130 reference system
consisting of the MGC3130
module, I
2
C to USB bridge
module and a 4-layer reference
electrode 95 × 60 mm sensitive
area. The Hillstar package includes an artificial hand for
parameterization and performance evaluation of the sensor.
With the MGC3130 software package including Aurea
graphical user interface and GestIC® technology library, the
MGC3130 Software Development Kit (SDK) and a set of
electrode reference designs the Hillstar Development Kit is
prepared for an easy design-in of MGC3130.
USB
PIC32 I/O Expansion Board (DM320002)
If you use a PIC32 starter board
(DM320001, DM320003), this I/O
expansion board will provide you with full
access to MCU signals, JTAG debugging
and ICSP development and enables the
connection of PICtail Plus daughter cards.
PICDEM FS USB Demonstration Board (DM163025-1)
The PICDEM FS USB Demonstration
Kit is an easy-to-use evaluation
platform for our PIC18F2X/4XK50
family of USB MCUs. These
devices support full-speed USB
communication without the need for an external crystal,
which allows significant cost savings and reduced design
effort. The demo kit provides all of the hardware needed to
demonstrate and develop a complete USB communication
solution. Additional software is available for free at from
our online software libraries.
Application-Specific Development Tools
14
Quick Guide to Microchip Development Tools