User manual

MCP6XXX Amplifier Evaluation Board 2 User’s Guide

TABLE B-2: BILL OF MATERIALS – UNPOPULATED PARTS (102-00148R1)

The BOM in Table B-3 corresponds to the collection of resistors, capacitors, jumpers

and MCP6021 op amps that come in the Accessory Bag which is shipped in the

MCP6XXX Amplifier Evaluation Board 2 Kit. These components are placed in an

separate ESD bag. They support the circuit in Section 2.4.1 “Building the Amplifier”.

Customers need to provide the resistors and capacitors for more amplifier circuits.

TABLE B-3: BILL OF MATERIALS – ACCESSORY BAG PARTS (102-00148R1)

Qty

Reference Description Manufacturer Part Number

1 U1 MCP6021, PDIP-8, Single Op

Amp

Microchip Technology Inc MCP6021-E/P

1 U2 MCP6021, SOIC-8, Single Op

Amp

Microchip Technology Inc MCP6021-E/SN

15 R1-R7, RISO, RL

C1-C5, CL

Not populated when shipped to

customer

——

Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM

used in manufacturing uses all RoHS-compliant components.

Qty

Reference Description Manufacturer Part Number

1 Accessory Bag CAP CER 56PF 50V C0G

RADIAL

Murata Electronics RPE5C1H560J2P1Z03B

1 Accessory Bag JUMPER ZERO OHM 1/8W Yageo Corporation ZOR-12-B-52

1 Accessory Bag RES 2.00K OHM 1/4W 1%

METAL FILM

Yageo Corporation MFR-25FBF-2K00

5 Accessory Bag RES 7.87K OHM 1/4W 1%

METAL FILM

Yageo Corporation MFR-25FBF-7K87

1 ESD Sample Box MCP6021, Single Op Amp,

PDIP-8

Microchip Technology Inc. MCP6021-E/P

Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM

used in manufacturing uses all RoHS-compliant components.