User manual

ACTIVE FILTER DEMO BOARD KIT
USER’S GUIDE
© 2006 Microchip Technology Inc. DS51614A-page 39
Appendix B. Bill Of Materials (BOM)
B.1 V
DD
/2 FILTER SECTION BOMS
The BOM in Table B-1 corresponds to Figure 2-2. Unpopulated parts are in Table B-2.
TABLE B-1: BILL OF MATERIALS (102-00098R1)
TABLE B-2: BILL OF MATERIALS – UNPOPULATED PARTS (102-00098R1)
Qty Reference Description Manufacturer Part Number
2C
3
, C
4
100 nF, 50V, 10%, X7R,
0805 SMD, Ceramic
Kemet
®
Electronics
C0805C104K5RACTU
2C
1
, C
2
1.0 µF, 16V, 10%, X7R,
0805 SMD, Ceramic
Kemet
Electronics
C0805C105K4RACTU
1JP
1
Header, 2 × 2, 0.100" Pitch,
Vertical, Gold
Amp
®
/Tyco
®
Electronics
87227-2
1(for JP
1
) Shunt, 1 × 2, With Handle, Gold AMP/Tyco
Electronics
881545-2
1J
2
Header, Male, 1 × 3, 0.100",
R/A, Tin
AMP/Tyco
Electronics
640453-3
1P
2
Header, Female, 1 × 3, 0.100",
R/A, Tin
Mill-Max
®
801-44-003-20-001000
2R
1
, R
2
20.0 kΩ, 1/8W, 1%, 0805 SMD Yageo
®
America
RC0805FR-0720KL
5TP
1
–TP
5
PC Test Point, Compact,
Surface Mount
Keystone
Electronics
5016
1(for U
1
) IC Socket, 8-pin DIP, Tin, 0.300" AMP/Tyco
Electronics
2-641260-1
1 PCB RoHS Compliant Bare PCB,
V
DD
/2 Filter Section
(1.0 in × 2.0 in)
— 104-00098R1
Note 1: The components listed in this Bill of Materials are representative of the PCB
assembly. The released BOM used in manufacturing uses all RoHS-compliant
components.
Reference Description Manufacturer Part Number
J
1
Header, Male, 1 × 3, 0.100",
R/A, Tin (Note 1)
AMP/Tyco
Electronics
640453-3
P
1
Header, Female, 1 × 3, 0.100",
R/A, Tin (Note 1)
Mill-Max
®
801-44-003-20-001000
U
1
MCP6271, Single Op Amp, 2 MHz,
PDIP-8 (Note 2)
Microchip
Technology Inc
MCP6271-E/P
SOIC-8 (Note 3) Microchip
Technology Inc
MCP6271-E/SN
Note 1: These parts are supplied by the user, if desired.
2: This op amp is supplied by Microchip; it is found in the Accessory Bag described in
Table B-5. Any other op amp is supplied by the user.
3: Op amps in SOIC-8 package are supplied by the user, if desired. See ”4.6 “Using
8-Pin SOIC Op Amps” for information on using op amps in these packages (150
mil wide).