Datasheet

© 2012 Microchip Technology Inc. DS25124A-page 17
MCP6V11/1U
3.0 PIN DESCRIPTIONS
Descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
3.1 Analog Outputs
The analog output pins (V
OUT
) are low-impedance
voltage sources.
3.2 Analog Inputs
The non-inverting and inverting inputs (V
IN
+, V
IN
–, …)
are high-impedance CMOS inputs with low bias
currents.
3.3 Power Supply Pins
The positive power supply (V
DD
) is 1.6V to 5.5V higher
than the negative power supply (V
SS
). For normal
operation, the other pins are between V
SS
and V
DD
.
Typically, these parts are used in a single (positive)
supply configuration. In this case, V
SS
is connected to
ground and V
DD
is connected to the supply. V
DD
will
need bypass capacitors.
MCP6V11 MCP6V11U
Symbol Description
SOT-23 SOT-23, SC-70
14V
OUT
Output (op amp A)
22V
SS
Negative Power Supply
31V
IN
+ Non-inverting Input (op amp A)
43V
IN
– Inverting Input (op amp A)
55V
DD
Positive Power Supply