Datasheet

 2010-2011 Microchip Technology Inc. DS22243D-page 15
MCP6H01/2/4
3.0 PIN DESCRIPTIONS
Descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
3.1 Analog Outputs
The output pins are low-impedance voltage sources.
3.2 Analog Inputs
The non-inverting and inverting inputs are
high-impedance CMOS inputs with low bias currents.
3.3 Power Supply Pins
The positive power supply (V
DD
) is 3.5V to 16V higher
than the negative power supply (V
SS
). For normal
operation, the other pins are at voltages between V
SS
and V
DD
.
Typically, these parts can be used in single-supply
operation or dual-supply operation. Also, V
DD
will need
bypass capacitors.
3.4 Exposed Thermal Pad (EP)
There is an internal electrical connection between the
Exposed Thermal Pad (EP) and the V
SS
pin; they must
be connected to the same potential on the Printed
Circuit Board (PCB).
MCP6H01 MCP6H02 MCP6H04
Symbol Description
SC70-5,
SOT-23-5
SOIC2x3TDFNSOIC2x3TDFN
SOIC,
TSSOP
16611 1V
OUT
, V
OUTA
Analog Output (op amp A)
42222 2V
IN
–, V
INA
– Inverting Input (op amp A)
33333 3V
IN
+, V
INA
+ Non-inverting Input (op amp A)
57788 4 V
DD
Positive Power Supply
——— 5 5 5 V
INB
+ Non-inverting Input (op amp B)
——— 6 6 6
V
INB
–
Inverting Input (op amp B)
——— 7 7 7 V
OUTB
Analog Output (op amp B)
————— 8 V
OUTC
Analog Output (op amp C)
————— 9 V
INC
– Inverting Input (op amp C)
————— 10 V
INC
+ Non-inverting Input (op amp C)
24444 11 V
SS
Negative Power Supply
————— 12 V
IND
+ Non-inverting Input (op amp D)
————— 13 V
IND
– Inverting Input (op amp D)
————— 14 V
OUTD
Analog Output (op amp D)
— 1, 5, 8 1, 5, 8 — — — NC No Internal Connection
— — 9 — 9 — EP Exposed Thermal Pad (EP); must
be connected to V
SS
.