Datasheet

MCP651/1S/2/3/4/5/9
DS22146C-page 6  2009-2011 Microchip Technology Inc.
1.3 Timing Diagram
FIGURE 1-1: Timing Diagram.
TABLE 1-4: TEMPERATURE SPECIFICATIONS
Electrical Characteristics: Unless otherwise indicated, all limits are specified for: V
DD
= +2.5V to +5.5V, V
SS
= GND.
Parameters Sym Min Typ Max Units Conditions
Temperature Ranges
Specified Temperature Range T
A
-40 — +125 °C
Operating Temperature Range T
A
-40 — +125 °C (Note 1)
Storage Temperature Range T
A
-65 — +150 °C
Thermal Package Resistances
Thermal Resistance, 5L-2×3 SOT 
JA
— 220.7 — °C/W
Thermal Resistance, 6L-2×3 SOT 
JA
— 190.5 — °C/W
Thermal Resistance, 8L-2×3 TDFN 
JA
— 52.5 — °C/W
Thermal Resistance, 8L-3×3 DFN 
JA
—63—°C/W(Note 2)
Thermal Resistance, 8L-SOIC 
JA
— 163 — °C/W
Thermal Resistance, 10L-3×3 DFN 
JA
—71—°C/W(Note 2)
Thermal Resistance, 10L-MSOP 
JA
— 202 — °C/W
Thermal Resistance, 14L-SOIC 
JA
— 95.3 — °C/W
Thermal Resistance, 14L-TSSOP 
JA
— 100 — °C/W
Thermal Resistance, 16L-4x4-QFN 
JA
—46—°C/W(Note 2)
Note 1: Operation must not cause T
J
to exceed Maximum Junction Temperature specification (150°C).
2: Measured on a standard JC51-7, four layer printed circuit board with ground plane and vias.
High-Z
V
DD
V
OUT
-3 µA (typical)
High-Z
I
SS
I
CS
-3 µA (typical)
-6 mA (typical)
V
PRH
V
PRL
t
PON
t
POFF
On
0nA(typical)
High-Z
-3 µA (typical)
-6 mA (typical)
t
COFF
t
CON
On
0.7 µA (typical)
0 nA (typical)
CAL/CS
V
IH
V
IL
t
CSU
Note : For the MCP655 dual and the MCP659 quad, there is an additional constraint on toggling the two CAL/CS pins close
together; see the T
CON
specification in Table 1- 3.