Datasheet

© 2009 Microchip Technology Inc. DS22196A-page 13
MCP6286
3.0 PIN DESCRIPTIONS
Descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
3.1 Analog Output
The output pin is low-impedance voltage source.
3.2 Analog Inputs
The non-inverting and inverting inputs are
high-impedance CMOS inputs with low bias currents.
3.3 Power Supply Pins
The positive power supply (V
DD
) is 2.2V to 5.5V higher
than the negative power supply (V
SS
). For normal
operation, the other pins are at voltages between V
SS
and V
DD
.
Typically, these parts are used in a single (positive)
supply configuration. In this case, V
SS
is connected to
ground and V
DD
is connected to the supply. V
DD
will
need bypass capacitors.
MCP6286
Symbol Description
SOT-23-5
1V
OUT
Analog Output
2V
SS
Negative Power Supply
3V
IN
+ Non-inverting Input
4V
IN
– Inverting Input
5V
DD
Positive Power Supply