Datasheet
Table Of Contents
- 1.0 Electrical Characteristics
- 2.0 Typical Performance Curves
- FIGURE 2-1: Input Offset Voltage at VDD = 5.5V.
- FIGURE 2-2: Input Offset Voltage at VDD = 2.3V.
- FIGURE 2-3: Input Bias Current at VDD = 5.5V.
- FIGURE 2-4: Input Offset Voltage Drift at VDD = 5.5V.
- FIGURE 2-5: Input Offset Voltage Drift at VDD = 2.3V.
- FIGURE 2-6: Input Offset Current at VDD = 5.5V.
- FIGURE 2-7: Input Offset Voltage vs. Ambient Temperature.
- FIGURE 2-8: Quiescent Current vs. Ambient Temperature.
- FIGURE 2-9: Maximum Output Voltage Swing vs. Ambient Temperature at RL = 5 kW.
- FIGURE 2-10: Input Bias, Offset Currents vs. Ambient Temperature.
- FIGURE 2-11: CMRR, PSRR vs. Ambient Temperature.
- FIGURE 2-12: Maximum Output Voltage Swing vs. Ambient Temperature at RL = 25 kW.
- FIGURE 2-13: Output Short Circuit Current vs. Ambient Temperature.
- FIGURE 2-14: Slew Rate vs. Ambient Temperature.
- FIGURE 2-15: Input Bias, Offset Currents vs. Common Mode Input Voltage.
- FIGURE 2-16: Gain Bandwidth Product, Phase Margin vs. Ambient Temperature.
- FIGURE 2-17: Input Offset Voltage vs. Common Mode Input Voltage.
- FIGURE 2-18: Input Offset Voltage vs. Output Voltage.
- FIGURE 2-19: Quiescent Current vs. Power Supply Voltage.
- FIGURE 2-20: DC Open-Loop Gain vs. Load Resistance.
- FIGURE 2-21: Gain-Bandwidth Product, Phase Margin vs. Load Resistance.
- FIGURE 2-22: Output Voltage Headroom vs. Output Current Magnitude.
- FIGURE 2-23: DC Open-Loop Gain vs. Power Supply Voltage.
- FIGURE 2-24: Channel-to-Channel Separation vs. Frequency (MCP617 and MCP619 only).
- FIGURE 2-25: Open-Loop Gain, Phase vs. Frequency.
- FIGURE 2-26: Input Noise Voltage, Current Densities vs. Frequency.
- FIGURE 2-27: Small-Signal, Non-Inverting Pulse Response.
- FIGURE 2-28: CMRR, PSRR vs. Frequency.
- FIGURE 2-29: Maximum Output Voltage Swing vs. Frequency.
- FIGURE 2-30: Small-Signal, Inverting Pulse Response.
- FIGURE 2-31: Large-Signal, Non-Inverting Pulse Response.
- FIGURE 2-32: Chip Select (CS) to Amplifier Output Response Time (MCP618 only).
- FIGURE 2-33: The MCP616/7/8/9 Show No Phase Reversal.
- FIGURE 2-34: Large-Signal, Inverting Pulse Response.
- FIGURE 2-35: Chip Select (CS) Internal Hysteresis (MCP618 only).
- FIGURE 2-36: Measured Input Current vs. Input Voltage (below VSS).
- 3.0 Pin Descriptions
- 4.0 Applications Information
- 5.0 Design Aids
- 6.0 Packaging Information
© 2008 Microchip Technology Inc. DS21613C-page 31
MCP616/7/8/9
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO. X /XX
PackageTemperature
Range
Device
Device: MCP616: Single Operational Amplifier
MCP616T: Single Operational Amplifier
(Tape and Reel for SOIC, MSOP)
MCP617: Dual Operational Amplifier
MCP617T: Dual Operational Amplifier
(Tape and Reel for SOIC and MSOP)
MCP618: Single Operational Amplifier w/Chip Select (CS
)
MCP618T: Single Operational Amplifier w/Chip Select (CS
)
(Tape and Reel for SOIC and MSOP)
MCP619: Quad Operational Amplifier
MCP619T: Quad Operational Amplifier
(Tape and Reel for SOIC and TSSOP)
Temperature Range: I = -40°C to +85°C
Package: MS = Plastic MSOP, 8-lead
P = Plastic DIP (300 mil Body), 8-lead, 14-lead
SN = Plastic SOIC (3.90 mm body), 8-lead
SL = Plastic SOIC (3.90 mm Body), 14-lead (MCP619)
ST = Plastic TSSOP (4.4mm Body), 14-lead (MCP619)
Examples:
a) MCP616-I/P: Industrial Temperature,
8 lead PDIP.
b) MCP616-I/SN: Industrial Temperature,
8 lead SOIC.
c) MCP616T-I/MS: Tape and Reel,
Industrial Temperature,
8 lead MSOP.
a) MCP617-I/MS: Industrial Temperature,
8 lead MSOP.
b) MCP617T-I/MS: Tape and Reel,
Industrial Temperature,
8 lead MSOP.
c) MCP617-I/P: Industrial Temperature,
8 lead PDIP.
a) MCP618-I/SN: Industrial Temperature,
8 lead SOIC.
b) MCP618T-I/SN: Tape and Reel,
Industrial Temperature,
8 lead SOIC.
c) MCP618-I/P: Industrial Temperature,
8 lead PDIP.
a) MCP619T-I/SL: Tape and Reel,
Industrial Temperature,
14 lead SOIC.
b) MCP619T-I/ST: Tape and Reel,
Industrial Temperature,
14 lead TSSOP.
c) MCP619-I/P: Industrial Temperature,
14 lead PDIP.