Datasheet

© 2009 Microchip Technology Inc. DS21685D-page 37
MCP6021/1R/2/3/4
APPENDIX A: REVISION HISTORY
Revision D (February 2009)
The following is the list of modifications:
1. Changed all references to 6.0V back to 5.5V
throughout document.
2. Design Aids: Name change for Mindi Simula-
tion Tool.
3. Section 1.0 “Electrical Characteristics”, DC
Electrical Specifications: Corrected “Maxi-
mum Output Voltage Swing” condition from 0.9V
Input Overdrive to 0.5V Input Overdrive.
4. Section 1.0 “Electrical Characteristics”, AC
Electrical Specifications: Changed Phase
Margin condition from G = +1 to G= +1 V/V.
5. Section 1.0 “Electrical Characteristics”, AC
Electrical Specifications: Changed Settling
Time, 0.2% condition from G = +1 to G = +1 V/V.
6. Section 1.0 “Electrical Characteristics”:
Added Section 1.1 Test Circuits.
7. Section 5.0 “Design AIDS”: Name change for
Mindi Simulation Tool. Added new boards to
Section 5.5 “Analog Demonstration and
Evaluation Boards” and new application notes
to Section 5.6 “Application Notes”.
8. Updates Appendix A: “Revision History”
Revision C (March 2006)
The following is the list of modifications:
1. Added SOT-23-5 package option for single op
amps MCP6021 and MCP6021R (E-temp only).
2. Added MSOP-8 package option for E-temp
single op amp (MCP6021).
3. Corrected package drawing on front page for
dual op amp (MCP6022).
4. Clarified spec conditions (I
SC
, PM and THD+N)
in Section 2.0 “Typical Performance
Curves”.
5. Added Section 3.0 “Pin Descriptions”.
6. Updated Section 4.0 “Applications informa-
tion” for THD+N, unused op amps, and gain
peaking discussions.
7. Corrected and updated package marking infor-
mation in Section 6.0 “Packaging Informa-
tion”.
8. Added Appendix A: “Revision History”.
Revision B (November 2003)
• Second Release of this Document
Revision A (November 2001)
• Original Release of this Document.