User manual

MCP4728 EVALUATION BOARD
USERS GUIDE
© 2009 Microchip Technology Inc. DS51837A-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP4728 Evaluation Board. Items discussed in this chapter include:
Document Layout
Conventions Used in this Guide
Recommended Reading
The Microchip Web Site
Customer Support
DOCUMENT LAYOUT
This document describes how to use the MCP4728 Evaluation Board with PICkit
TM
Serial Analyzer. The manual layout is as follows:
Chapter 1. “Quick Start Instructions” – this chapter provides an overview of the
MCP4728 Evaluation Board and instructions on how to use the MCP4728
Evaluation Board with the PICkit
TM
Serial Analyzer.
Appendix A. “Schematic and Layouts” – shows the schematic and layout
diagrams for the MCP4728 Evaluation Board.
Appendix B. “Bill Of Materials (BOM)” – lists the parts used to build the
MCP4728 Evaluation Board.
Appendix C. “MCP4728 Read/Write Commands” – shows the read/write com-
mands for the MCP4728 Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.