User manual

Quick Start Instructions
© 2009 Microchip Technology Inc. DS51837A-page 9
1.3.1 PICkit Serial Analyzer PC Software Setup for the MCP4728
Evaluation Board
The following steps describe how to set up and use the PICkit Serial Analyzer PC
Graphic User Interface (GUI).
1. Install the PICkit Serial Analyzer software onto your personal computer (PC).
2. Connect the USB cable between the PICkit Serial Analyzer and the PC.
3. Run the PICkit Serial PC Software: It will open to the following GUI. Click the
Next button and follow the instructions.
FIGURE 1-3: PICkit Serial Analyzer Configuration Wizard Welcome Window.
4. Select the Communication Mode type: I
2
C Master, and click the Next button.
FIGURE 1-4: Step 1 - Communication Mode Selection.