User manual

MCP4725 SOT-23-6 Evaluation Board User’s Guide
DS51669A-page 16 © 2007 Microchip Technology Inc.
5. Verifying the EEPROM Data.
After sending the EEPROM write command in Step 4, the device holds the data in the
EEPROM. The data in the EEPROM is non-volatile. To check this non-volatile data, you
can remove the V
DD
from the MCP4725 SOT-23-6 Evaluation Board once, and bring
back up the V
DD
again. You will see the same analog voltage output at the V
OUT
terminal.