User manual

MCP4725 SOT-23-6 Evaluation Board User’s Guide

1.3.1.2 PICKIT SERIAL ANALYZER PC SOFTWARE SET-UP FOR DAC DEVICE

PROGRAMMING AND ANALOG VOLTAGE OUTPUT MEASUREMENT

1. Install the PICkit Serial Analyzer software in your computer.

2. Connect the USB cable between the PICkit Serial Analyzer and your PC.

3. Run the PICkit Serial PC Software: It will open up the following graphic user inter-

face (GUI). Click Next > and follow the instructions:

4. Select the I2C Master option radio button for the Communication Mode type and

click the Next > button.