Datasheet

Installation and Operation

2.4.2.1 THE GUI SCREENS AND GUI CONFIGURATION

Figure 2-8 shows the GUI when the application is first started.

FIGURE 2-8: 1st Screen of GUI.

Figure 2-9 shows the GUI box where the SPI Baud Rate is specified. Clicking on the

“Set Baud” button results in an actual Baud Rate of 9.62 kHz, as shown in Figure 2-10.

This reflects the actual Baud Rate based on the PICkit Serial Analyzer’s clock fre-

quency.

FIGURE 2-9: Configuring the Baud Rate - Desired Baud Rate.