Datasheet

Installation and Operation

2.4.1.1 THE MCP42XXDM-PTPS JUMPER CONFIGURATION

Before inserting the board into the Explorer 16 Developers Board, the jumper

configuration must be verified. Figure 2-4 shows the configurations of the jumpers.

FIGURE 2-4: MCP4XXDM-PTPLS Jumper Configuration and Oscilloscope Test Points.

Channel 4

Channel 1

Channel 2

Channel 3

Channel 4

(Program 2 SDO Signal)

Note: This is the Jumper configuration that the board should be shipped with.