User manual

MCP355X SENSOR APPLICATION

DEVELOPER’S BOARD USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

MCP355X Sensor Application Developer’s Board. Items discussed in this chapter

include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the MCP355X Sensor Application Developer’s

Board as a development tool. The manual layout is as follows:

• Chapter 1. “Product Overview” – Important information about the MCP355X

Sensor Application Developer’s Board.

• Chapter 2. “Hardware Description”– Includes detailed description of the

hardware for the MCP355X Sensor Application Developer’s Board.

• Chapter 3. “Firmware Description” – Includes detailed description of the

software for the MCP355X Sensor Application Developer’s Board.

• Chapter 4. “DataView” - Includes detail description of the DataView software.

• Appendix A. “Schematic and Layouts” – Shows the schematic and layout

diagrams for the MCP355X Sensor Application Developer’s Board.

• Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the

MCP355X Sensor Application Developer’s Board

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.